Rubber products in the movement, stress and friction, easy to produce charge accumulation and with static electricity, products on the surface with static electricity, not only will adsorb a large amount of dust and oil, affecting the aesthetics of the products, but also affects the performance of the use of rubber products to accelerate the surface of the aging, and may even spark discharge, causing the surrounding flammable and explosive substances on fire or explosion, the occurrence of safety accidents. Therefore, in today's large-scale use of rubber and other polymer materials, electrostatic hazards should attract people's attention.

Methods to prevent electrostatic hazards:
On the one hand, to reduce or prevent friction as much as possible to reduce the generation of static electricity.
On the other hand is to find ways to eliminate surface static electricity.
Elimination of static electricity on the surface of rubber products in many ways: such as adding rubber products in the rubber antistatic agent or spraying antistatic agent on the surface. One of the most common methods is to add antistatic agent, so that the static electricity generated by the continuous leakage to prevent the accumulation of static electricity.
Rubber refining static electricity, the causes and methods of protection
Static electricity is very common when making rubber, no matter what the season is. When static electricity is serious, it can cause fire and lead to production accidents.

The reason of static electricity is analyzed:
Strong friction between the rubber material and the roller, resulting in friction charged phenomenon.
Rubber products production to prevent electrostatic hazards, this is a lot of production of rubber products enterprises face problems, should be worth the attention of the industry.

Measures to protect against static electricity are:
1, dry air, pay attention to moisturizing, especially dry in winter!
2, equipment grounding problems, to ensure that the normal grounding, will be double rollers connected to a ground line.
3, with clothes, shoes have a relationship, chemical fiber clothes and insulated shoes do not wear, itself static electricity is very serious.
4, related to the human body, in the refining of rubber, the hand is not too dry, you can wet your hands down.
5, the operation process, as long as the tip of the cutter at any time in contact with the roller, to avoid direct contact between the hand and the roller, you can avoid the pain of this electrostatic discharge.
6, manual input rubber action must be light and slow. The cover is strictly prohibited to use insulating materials.
7, rubber refining equipment to install inductive static eliminator.
8, where there is an explosion, fire hazards and to prevent the human body electrified place, the operator must wear anti-static work clothes, anti-static shoes or conductive shoes. The operation area should be paved with conductive ground